In general, the brush of the maintenance is mainly composed of the following aspects:
The first is to check the bar with no large cracks, with or without broken. If the bar is broken or has a large crack, you can use the adhesive to repair. In particular, the use of special seal with a sticker brush, it is easy to make a good crack. Of course, if the seal brush damage serious, or a greater degree of aging, it is best to replace the new seal brush trouble. Seal brush replacement method is not difficult, but in order to do better, it is best to ask the professional staff.
Brush the daily maintenance work, mainly including the following. First, the use of car detergent for cleaning, after cleaning, coated with a layer of high permeability of the protective agent, in order to prevent the brush aging. In addition, the seal between the brush gap is easy to plug the dust, causing corrosion. To this end, you should use the brush to clean the dust and so on.
Seal brush in your home is not very conspicuous but it is the cornerstone of stability, it is to ensure that doors and windows airtight, watertight, sound insulation and other aspects of the effective measures, while the glass in the windows and doors by the external safety of the existence of a reliable guarantee. As the seal brush by the climate and sunlight, will produce shrinkage, aging, deformation, therefore, the seal brush is not allowed to work in the tensile state, should maintain its free state. In order to tightly hold the glass, in the installation process will often pull the seal too tight, to ensure that the free state, so that in the tensile deformation state. Practice has proved that the seal bar brush in the tensile deformation of the state to install, there have been sealing brush off, pull off, cracks and so on. To this end, in the installation, the length of the brush than the doors and windows of the assembly side of the longer, at the corner of the ramp open, with adhesive sticky solid, leaving enough expansion margin.
service
0769-87928085
